Lisosa tsa Semicera10x10mm Nonpolar M-sefofane sa Aluminium Substratee entsoe ka makhethe ho fihlela litlhoko tse nepahetseng tsa lits'ebetso tse tsoetseng pele tsa optoelectronic. Karoloana ena e na le sebopeho sa sefofane sa M-se sa polar, se bohlokoa bakeng sa ho fokotsa litlamorao tsa polarization ho lisebelisoa tse kang li-LED le li-laser diode, tse lebisang ts'ebetsong le ts'ebetsong e ntlafetseng.
The10x10mm Nonpolar M-sefofane sa Aluminium Substratee entsoe ka boleng bo ikhethang ba kristale, e netefatsang bofokoli bo fokolang le bots'epehi bo phahameng ba sebopeho. Sena se etsa hore e be khetho e nepahetseng bakeng sa kholo ea epitaxial ea lifilimi tsa boleng bo phahameng ba III-nitride, tse bohlokoa bakeng sa nts'etsopele ea lisebelisoa tsa optoelectronic tsa moloko o latelang.
Boenjiniere bo nepahetseng ba Semicera bo netefatsa hore e 'ngoe le e 'ngoe10x10mm Nonpolar M-sefofane sa Aluminium Substratee fana ka botenya bo sa fetoheng le botenya ba holim'a metsi, tse bohlokoa bakeng sa ho beha filimi e tšoanang le ho etsa lisebelisoa. Ho feta moo, boholo ba compact ea substrate bo etsa hore e tšoanele libaka tsa lipatlisiso le tsa tlhahiso, e lumellang tšebeliso e bonolo lits'ebetsong tse fapaneng. Ka botsitso ba eona bo botle ba mocheso le lik'hemik'hale, substrate ena e fana ka motheo o tšepahalang bakeng sa nts'etsopele ea mahlale a morao-rao a optoelectronic.
| Lintho | Tlhahiso | Patlisiso | Dummy |
| Crystal Parameters | |||
| Polytype | 4H | ||
| Phoso ea sebopeho sa bokaholimo | <11-20>4±0.15° | ||
| Litekanyetso tsa Motlakase | |||
| Dopant | n-mofuta oa Nitrojene | ||
| Ho hanyetsa | 0.015-0.025ohm · cm | ||
| Mechanical Parameters | |||
| Diameter | 150.0±0.2mm | ||
| Botenya | 350±25 μm | ||
| Boemo ba mantlha bo bataletseng | [1-100]±5° | ||
| Bolelele ba pele bo bataletseng | 47.5±1.5mm | ||
| Folete ea bobeli | Ha ho letho | ||
| TTV | ≤5 μm | ≤10 μm | ≤15 μm |
| LTV | ≤3 μm(5mm*5mm) | ≤5 μm(5mm*5mm) | ≤10 μm(5mm*5mm) |
| Inamela | -15μm ~ 15μm | -35μm ~ 35μm | -45μm ~ 45μm |
| Warp | ≤35 μm | ≤45 μm | ≤55 μm |
| Front(Si-face) roughness(AFM) | Ra≤0.2nm (5μm*5μm) | ||
| Sebopeho | |||
| Boima ba micropipe | <1 e/cm2 | <10 e/cm2 | <15 e/cm2 |
| Litšila tsa tšepe | ≤5E10atoms/cm2 | NA | |
| BPD | ≤1500 ea/cm2 | ≤3000 ea/cm2 | NA |
| TSD | ≤500 ea/cm2 | ≤1000 ea/cm2 | NA |
| Boleng ba Pele | |||
| Pele | Si | ||
| Qetello ea bokaholimo | Si-face CMP | ||
| Likaroloana | ≤60ea/wafer (boholo ≥0.3μm) | NA | |
| Mengwapo | ≤5ea/mm. Bolelele ba kakaretso ≤Diameter | Bolelele bo akaretsang≤2*Diameter | NA |
| Lekhapetla la lamunu/makoti/matheba/maphatso/mapetso/tshilafatso | Ha ho letho | NA | |
| Li-edge chips/indents/fracture/hex plates | Ha ho letho | ||
| Libaka tsa polytype | Ha ho letho | Kakaretso≤20% | Kakaretso≤30% |
| Ho tšoaea ka laser ka pele | Ha ho letho | ||
| Boleng ba Morao | |||
| Qetello ea morao | C-sefahleho sa CMP | ||
| Mengwapo | ≤5ea/mm, bolelele bo akaretsang≤2* bophara | NA | |
| Litšitiso tse ka morao (li-chips / indents) | Ha ho letho | ||
| Bokhopo ba mokokotlo | Ra≤0.2nm (5μm*5μm) | ||
| Ho tšoaea ka morao laser | 1 mm (ho tloha pheletsong e ka holimo) | ||
| Qetello | |||
| Qetello | Chamfer | ||
| Sephutheloana | |||
| Sephutheloana | Epi e loketse ho paka ka vacuum Sephutheloana sa lik'hasete tse nang le liphaephe tse ngata | ||
| *Lintlha: "NA" e bolela hore ha ho na kopo Lintho tse sa boleloang li ka lebisa ho SEMI-STD. | |||
